Tuesday, January 10, 2023

gen 1 glock 23

Gen 1 Glock 23 - The .40 caliber S&W Glock 23 – which celebrated its 23rd anniversary in 2013 – is not only one of the most used handguns in law enforcement, but also one of the most popular handguns for civilians.

In addition to many local law enforcement agencies across the country, the FBI, US Marshals Service, and DEA choose the Glock 22 or 23 as their primary weapon. In fact, Glock reports that 65 percent of law enforcement agencies nationwide choose Glock. Designed for reliable operation and accurate shooting, their confidence in Glock performance is understandable.

Gen 1 Glock 23

Gen 1 Glock 23

Glock gave us the Model 23 in 1990 – an incredibly important year in the firearms industry. First was the introduction of the .40 S&W caliber. The collaboration between Smith & Wesson and Winchester gave the world a 185-grain bullet that traveled at over 1,000 feet per second—a cartridge with a nearly perfect balance of weight, mass, firepower, and sustained energy transfer. The FBI needed a gun for new cartridges, and Glock answered the call with the 22 and 23 models. The Glock 22 is full size, while the 23 is the compact model. Inspired by the Glock 19, the Glock 23 has the same specifications as the iconic 19, except for the difference in caliber.

Glock 23 .40

The first year of the Glock 23 was the same year that Glock made some changes to the model. Bypassing the Gen 1 frame, the Glock 23, a Gen 2 frame, received a third pin in the frame to support higher calibers, front and rear slings, and an enlarged locking block.

The Glock Gen 3 frame features a support rail, finger grooves, and a slim thumb rest.

Glock made significant changes in 1998, updating all models. These are the classic Gen 3 models. Glock added a support rail, finger grooves, and a thin thumb rest to the gun's frame. The new hood includes a full chamber indicator.

Glock added a new grip texture, the RTF2 (Rough Textured Frame), to the series in 2009, but it didn't last long. Glock 23s with the RTF2 grip frame had a pyramidal rigid grip structure and a serrated crescent slide serration. In 2011, RTF2 grip frames were no longer available to civilians and were only sold on law enforcement models. Glock left the pistol alone for 12 years until it released the Gen 4.

S&w Glock Model 24l

Gen 4 models introduced an improved double recoil spring and guide rod. New springs and guide rods help control recoil. The Gen 4 model also comes with an adjustable back strap. The RTF3 frame is similar to the RTF2 frame introduced in 2009. Additionally, Gen 4 Glocks have an ambidextrous magazine release button.

The latest edition of the Glock 23 series is completely made in the USA. The Glock 23 is stamped "USA" on the side instead of the "Austria" found on the standard Gen 3 model of USA-made pistols.

As a compact model in .40 caliber, the Glock 23 has a 4.02-inch barrel, making it about half an inch longer than the subcompact 27 model. Shooting both, you can tell the difference in felt recoil. The longer barrel makes the Glock 23 less fast. Basic, white dot front and white outline rear factory fixed sights make hitting the target easy and fast, and the grip size comfortably fits a variety of hand sizes from small to large. I don't know how Glock does it, but I've only met one person who can't hold a Glock comfortably.

Gen 1 Glock 23

The basic features of the Glock 23 are the same as any Glock. It has a sturdy polymer frame with a corrosion-free surface. Glocks do not show wear easily. I have never seen a used Glock that looked beat up. They can certainly take abuse. With only 34 parts, the Glock 23 is easy to disassemble, clean, assemble and maintain. Glock's famous "safe-action" trigger safety means there's no external safety to deal with when you need to ready the gun.

Iwb Glock 17 23 32 Holster

The Glock 23 holds 13 rounds of .40 S&W ammunition. It has a lot of stopping power in a compact gun, making it ideal for concealment. Perfect size - not heavy on the hand for practice, but compact enough to conceal easily and conveniently. Total length is 6.85 inches. It is 5 inches long, 1.18 inches wide and weighs 31.03 ounces when loaded.

The 5.5-kg trigger pull is not surprising, as it is standard equipment in the semi-automatic category. The trigger is smooth – its breakpoint and reset are smooth for fast and accurate tracking.

If there are parts on the Glock 23 that you don't like, such as the trigger or sights, there are many aftermarket accessories available. Additionally, the Glock 23 can be converted to .357 Sig or 9mm with the appropriate conversion kit.

There is no denying that a Glock - any Glock - is a great gun. As we say here, "Just get a Glock and be done with it." A very common question for new Glock buyers is, "What generation is my Glock?" Prior to the fourth generation, Glock only officially recognized model numbers, which contributed to the idea that "a Glock is a Glock is a Glock - they're all the same." However, early collectors noticed the difference and informally settled on three main iterations or "generations" of the classification. The nomenclature is so widespread that Glock followed suit with the release of the 4th Gen in 2008, and their promotional literature highlights previous generations in some places.

Glock 23 Pistol Barrel

The pictures below will help you clearly identify which generation Glock belongs to, but note that there is a lot of overlap due to the models being gradually converted. Also, gen 3 guns are still in production due to handgun restrictions in California, so you may have a gen 5 gun that is older than a gen 3. Image annotations identify key features that are consistent across generations, but landmarks and internals may experience slight changes at different intervals—and sometimes back and forth—within the same generation. Significant frame variations, many of which are interchangeable in two or more segments, but some changes are short-lived within a generation.

The first generation was an age of constant change. The initial design, while reliable, was still under development. The only consistent feature is the grip structure, which wraps around the entire grip (no front or back strap checks). It has a smoother feel than later generations and is considered a "pucker texture" by collectors. Early guns had a thin stainless steel barrel with a parkerized finish that was introduced early (AD prefix in the latest) and increased barrel wall thickness in the AN prefix in the latest. There are also many variations in the magazine, case and small internal components. All guns are Austrian proof marked, but the placement or number of marks is not consistent. Very early (pre-US) guns and rifles produced for European markets do not have a serial number on the frame. Most early cannons were also equipped with sights, known as "weak sights" because of their fragility. Normal (static) versions are also available from time to time, although the target version costs a premium. All but some 19s had a crescent relief under the front bars of the frames.

Generation 2 is referred to as "Gen 1" by many new collectors or uninformed dealers. The confusion stems from two factors: 1. Genus 1 is extremely rare and many casual observers have never seen it. 2. Many models were introduced in the second generation series and some were called "1". They are considered "generations" because this is the first edition of that model. To clear things up, if you have a model 20 or later, you have a Gen 2 Glock, even if it is the first version of the gun. The obvious differences between the 1 and 2 for the 17-19 models are that the front and rear stripes have been given a checkered trim and the structure of the side panels has changed (deeper than the first generation). The second generation introduced 5 additional calibers, and all non-.380/9mm guns were equipped with a second locking pin to prevent the frame from turning higher. It is important to note that the number of needles does not indicate generation as many people believe. 9mm frames have only two pins from Gen 1 to Gen 3 production, while all other calibers have 3 pins. All full size frames carry a relief under the front strap.

Gen 1 Glock 23

By the late 90s, Glock had become a dominant force in the American gun market, and other manufacturers tried to copy the design. This created some pressure to "innovate" the Glock design to stay ahead of the pack.

Glock 19 Holster Iwb Kydex Holster Custom Fit: Glock 19 19x Glock 25 Glock 44 Glock 45 (gen 1 5) & Glock 23 Glock 32 (gen 3 4) Pistol

Microstamping firearms, gun microstamping, microstamping law, microstamping nj, firing pin microstamping, ca microstamping law, microstamping california, firearm microstamping, microstamping lawsuit, microstamping, sun microstamping, microstamping law california